CONSTRUCTION EDUCATION FOUNDATION OF NORTH TEXAS
Category Name:
Plumbing & Backflow Prevention
Courses For This Category
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| Backflow Awareness |
Grissom |
M T |
E |
8:00 AM |
4:30 PM |
3/4/2024 |
3/5/2024 |
|
| Backflow Practical Skills Refresher |
Grissom |
W |
E |
8:00 AM |
4:30 PM |
3/6/2024 |
3/6/2024 |
|
| Backflow Prevention Assembly Tester (BPAT) License |
Grissom |
M T W R F |
E |
8:00 AM |
4:30 PM |
2/5/2024 |
2/9/2024 |
|
| Piping Isometrics |
Miller |
M |
E |
4:30 PM |
7:30 PM |
1/22/2024 |
5/13/2024 |
|
| Plumbing I - A |
Bayerl |
T |
E |
4:30 PM |
9:00 PM |
1/16/2024 |
5/21/2024 |
|
| Plumbing I - B |
Brooks |
M |
E |
4:30 PM |
9:15 PM |
1/22/2024 |
5/20/2024 |
|
| Plumbing I - B |
Harkrader |
M |
E |
4:30 PM |
9:15 PM |
1/22/2024 |
5/20/2024 |
|
| Plumbing I - B |
Castillo |
M |
E |
4:30 PM |
9:15 PM |
1/22/2024 |
5/20/2024 |
|
| Plumbing I - B |
Bayerl |
R |
E |
4:30 PM |
9:00 PM |
1/18/2024 |
5/23/2024 |
|
| Plumbing II - B |
Brooks |
T |
E |
4:00 PM |
8:30 PM |
1/16/2024 |
5/21/2024 |
|
| Plumbing II - B |
Whitley |
T |
E |
4:30 PM |
9:00 PM |
1/16/2024 |
5/21/2024 |
|
| Plumbing III - B |
Tortorici Sr |
T |
E |
4:30 PM |
9:00 PM |
1/16/2024 |
5/21/2024 |
|
| Plumbing III - B |
Tortorici Sr |
R |
E |
4:30 PM |
9:00 PM |
1/18/2024 |
5/23/2024 |
|
| Plumbing IV - B |
Taylor |
W |
E |
4:30 PM |
9:00 PM |
1/17/2024 |
5/22/2024 |
|
| |
|
|
|
|
Legend: M=Monday, T=Tuesday, W=Wednesday, R=Thursday, F=Friday, Sa=Saturday, DFWEC=DFW Education Center, NLC=North Lake
College Main Campus, Online=Web Based Course
Type of Class: Short Term
2 Sessions/16 Hours
Prerequisite: Student must have a current Backflow Prevention Assembly Testers License.
This course offers Texas Commission of Environmental Quality (TCEQ) continuing educations hours for those who have already received their BPAT license. The course consists of 16 hours of class and lab work, which will include all new and updated information from the industry and governmental bodies. The class is split with 4 hours in the lab and 12 hours in the classroom. Lunch will be provided.
Note 1: Students must bring a copy of the 10th Edition USC Manual for Cross-Connection Control, as required by TCEQ. Books are available for purchase upon request. Contact the CEF office for book cost and to request a copy PRIOR to the first day of class.
Note 2: This course also meets TCEQ Backflow continuing education requirements for Irrigation/Landscape Inspector License.
Class Language: English
Class Fee: $390.00
None Required
$0.00 - Purchase Required
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| Backflow Awareness |
Grissom |
M T |
E |
8:00 AM |
4:30 PM |
3/4/2024 |
3/5/2024 |
|
Backflow Practical Skills Refresher
Type of Class: Short Term
1 Sessions/8 Hours
Prerequisite: Student must have a current Backflow Prevention Assembly Testers License.
This course offers Texas Commission of Environmental Quality (TCEQ) continuing educations hours for those who have already received their BPAT license. The course consists of 8 hours of class and lab work, which will include all new and updated information from the industry and governmental bodies. The class is split with 7 hours in the lab and 1 hour in the classroom. Lunch will be provided.
Note: This course also meets TCEQ Backflow continuing education requirements for Irrigation/Landscape Inspector License.
Class Language: English
Class Fee: $195.00
None Required
$0.00 - Purchase Required
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| Backflow Practical Skills Refresher |
Grissom |
W |
E |
8:00 AM |
4:30 PM |
3/6/2024 |
3/6/2024 |
|
Backflow Prevention Assembly Tester (BPAT) License
Type of Class: Short Term
5 Sessions/40 Hours
Prerequisite: Student is required to have two (2) years experience in a water related industry such as Plumbing, Sprinkler Fitting, Fire Alarm, Irrigation, etc.
This course offers Texas Commission of Environmental Quality (TCEQ) certification in Backflow Prevention, using our new state-of-the-art classrooms and labs with expert instruction that is required for certification and testing of backflow assemblies in the state of Texas. Topics include: The History of Backflow Prevention; Testing and Repair of Assemblies; (RPZA, DCVA, PVB, and SRVB) Cross Connection Control Program With State and Local Ordinance Information, and all related subjects. This 40-hour course is approved for 8-hour CEU in Customer Service Inspectors License, Irrigator License, Wastewater Operators License, Water Operators License and Water Treatment Specialist License.
Lunch is provided all 5 days.
Note 1: Students must bring a copy of the 10th Edition USC Manual for Cross-Connection Control, as required by TCEQ. Books are available for purchase upon request. Contact the CEF office for book cost and to request a copy PRIOR to the first day of class. 972-574-5200
Note 2: This course also meets TCEQ Backflow requirements for Irrigation/Landscape Inspector License.
Class Language: English
Class Fee: $765.00
USC Manual of Cross-Connection
$135.00 - Purchase Required
Basic Safety V6.0 (Construction Site Safety Orientation) 00101
$34.00 - Purchase Required
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| Backflow Prevention Assembly Tester (BPAT) License |
Grissom |
M T W R F |
E |
8:00 AM |
4:30 PM |
2/5/2024 |
2/9/2024 |
|
Type of Class: Seminar
1 Sessions/4 Hours
This course is designed for field personnel. This is a four (4) hour hands-on seminar. The most updated information and instruction will be provided on the following topics: cutting, reaming, threading/dies, joint/pipe dope/fitting identification and pipe wrench use.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Type of Class: Seminar
1 Sessions/4 Hours
This is designed for field personnel. This is a four (4) hour hands-on seminar. The most updated information and instruction will be provided on the following topics: Cutting/snap cutters, joining/no hubbands and fitting identifications.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
CPVC Solvent Cement & Cut Groove Training
Type of Class: Seminar
1 Sessions/4 Hours
This course is designed for field personnel. This is a four-hour hands-on seminar designed to teach participants the difference between CVPC and PVC, pressure ratings, and importance of proper joining techniques. We will explore FlowGuard Gold (SDR) one-step solvent cement methods, Corzan (Sch. 40/80) two -step solvent cement process, high oxidation environments like sodium hypochlorite applications and the most current cut grooving capabilities.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Fixture Carrier & Valves/Devices Identification
Type of Class: Seminar
1 Sessions/4 Hours
This course is designed for field personnel. This is a four (4) hour hands-on seminar. The most updated information and instruction will be provided on the following topics: Fixture Carrier Identification (Lavatory, Water Closet [Single & Double], Urinal), Identifying Different Valves (Ball, Butterfly, Gate, Backflow Preventers, RPZ’s, PRV’s), and Lead-Free Identification.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Introduction to iPad PlanGrid Usage
Type of Class: Short Term
5 Sessions/10 Hours
Prerequisite: Blueprint Reading knowledge
This 10 hour course will consist of Basic introduction to the iPad Plan Grid
program and familiarization with its system; Function and features and
Jobsite application of the program.
NOTE: The student is required to supply iPad for class.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Type of Class: Short Term
10 Sessions/40 Hours
This 10-week course was developed to provide hands-on training for those who have already received their Medical Gas Certification, but have no or minimal experience installing Medical Gas Systems. The primary areas that will be covered are: Understanding Medical Gas Systems; Purging of Systems; Installation; Testing the Systems; Certification; and Service.
NOTE: THIS IS NOT A MEDICAL GAS CERTIFICATION COURSE, NOR IS IT INTENDED AS A PREPARATION COURSE FOR MEDICAL GAS CERTIFICATION.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Non Lead & Copper Soldering & Brazing
Type of Class: Seminar
1 Sessions/6 Hours
This is a four (6) hour seminar consisting of both classroom and hands-on training. Effective January 3, 2014, brass valve inserts can no longer contain lead. Soldering with the new lead-free valve inserts is different than soldering with brass that contains lead. Learn the proper techniques that will put you ahead of the competition! Also covered in the class: Copper Material Identification; Preparing & Installing Copper Material; Hands-On Brazing Project; Safety. Lunch is included.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Type of Class: Semester
16 Sessions/48 Hours
Prerequisite: None Required
This class defines an Isometric Drawing. It incorporates commerical drawings, mechanical pipe and plumbing details, and shows how to draw in an isometic format. Emphasis is stressed on how to utilize isometrics in construction day to day operations, including planning of material takeoffs, scheduling manpower, equipment, etc.
Class Language: English
Class Fee: $630.00
Isometric Pad w/75
$43.00 - Purchase Required
Ruler, Architect
$14.00 - Purchase Required
Ruler, Angle 30-60 Degree
$13.00 - Purchase Required
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| Piping Isometrics |
Miller |
M |
E |
4:30 PM |
7:30 PM |
1/22/2024 |
5/13/2024 |
|
Type of Class: Seminar
1 Sessions/4 Hours
This course is designed for field personnel. This is a four (4) hour hands-on seminar. The most updated information and instruction will be provided on the following topics: addition/subtraction, fractions, decimals, decimal feet, offset 45’s and rolling offsets.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Type of Class: Semester
18 Sessions/80 Hours
Prerequisite: English or Spanish Math & Reading test, OR Applied Construction Math class or ESL class.
NOTE: If the Math/Reading test is taken in Spanish, student must take an ESL test as well.
All testing must be completed no later than Friday January 12, 2024.
The course topics are: Build Your Future in Construction; Basic Safety (Construction Site Safety Orientation); Plumbing Safety; Introduction to Plumbing Profession; Introduction to Hand Tools; Introduction to Power Tools; Tools of the Plumbing Trade; Introduction to Construction Math; Introduction to Plumbing Math; Copper Tube & Fittings; and Cast-Iron Pipe and Fittings.
Course: Applied Construction Math I
OR Course: Applied Construction Math I Spanish
OR Test: TABE Math - English
OR Test: TABE Math - Spanish
OR Test Out: Applied Construction Math
Course: English as a Second Language I
OR Test: TABE Reading - English
OR Test: TABE Reading - Spanish
Class Language: English
Class Fee: $1,650.00
Plumbing Level 1 4th ed NCCERconnect + Trainee Guide
$128.00 - Purchase Required
Core: Introduction to Basic Construction Skills w/ Access Card - 6th Ed.
$112.00 - Purchase Required
Calculator Scientific TI30XA
$17.00 - Purchase Required
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| Plumbing I - A |
Bayerl |
T |
E |
4:30 PM |
9:00 PM |
1/16/2024 |
5/21/2024 |
|
Type of Class: Semester
18 Sessions/80 Hours
Prerequisite: Plumbing I-A
The course topics are: Steel Pipe & Fittings; Introduction to Construction Drawings; Introduction to Plumbing Drawings; Plastic Pipe and Fittings; Introduction to Basic Rigging; Introduction to Plumbing Fixtures; Introduction to Drain, Waste, & Vent (DWV) Systems; Introduction to Water Distribution Systems; Basic Communication Skills; Basic Employability Skills; and Introduction to Material Handling.
Class Language: English
Class Fee: $1,303.00
Plumbing Level 1 4th ed NCCERconnect + Trainee Guide
$128.00 - Previously Purchased
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| Plumbing I - B |
Brooks |
M |
E |
4:30 PM |
9:15 PM |
1/22/2024 |
5/20/2024 |
|
| Plumbing I - B |
Harkrader |
M |
E |
4:30 PM |
9:15 PM |
1/22/2024 |
5/20/2024 |
|
| Plumbing I - B |
Castillo |
M |
E |
4:30 PM |
9:15 PM |
1/22/2024 |
5/20/2024 |
|
| Plumbing I - B |
Bayerl |
R |
E |
4:30 PM |
9:00 PM |
1/18/2024 |
5/23/2024 |
|
Type of Class: Semester
18 Sessions/80 Hours
Prerequisite: Plumbing I-B
The course topics are: Plumbing Math Two, Reading Commercial Drawings, Structural Penetrations/Insulation and Fire Stopping, Installing & Testing DWV Piping, Installing Roof/Floor & Area Drains, and Types of Valves.
Note: All students are required to attend one (1) additional 4 hour class.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Type of Class: Semester
18 Sessions/80 Hours
Prerequisite: Plumbing II-A
The course topics are: Installing & Testing Water Supply Piping; Installing Fixtures and Valves; Basic Electricity; Installing Water Heaters; and Fuel Gas & Fuel Oil Systems.
OR Course: Plumbing II - A Spanish
Class Language: English
Class Fee: $1,650.00
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| Plumbing II - B |
Brooks |
T |
E |
4:00 PM |
8:30 PM |
1/16/2024 |
5/21/2024 |
|
| Plumbing II - B |
Whitley |
T |
E |
4:30 PM |
9:00 PM |
1/16/2024 |
5/21/2024 |
|
Type of Class: Semester
18 Sessions/80 Hours
Prerequisite: Plumbing II-B
The course topics are: Applied Math, Sizing & Protecting the Water Supply System, Potable Water Supply Treatment, and Types of Venting.
Note: All students are required to attend one (1) additional 4 hour class.
OR Course: TD TECH - Plumbing II
OR Course: Plumbing II - B Spanish
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Type of Class: Semester
18 Sessions/80 Hours
Prerequisite: Plumbing III-A
The course topics are: Sizing DWV & Storm Systems; Sewage Pumps & Sump Pumps; Corrosive-Resistant Waste Piping; Compressed Air and Service Plumbing.
Class Language: English
Class Fee: $1,303.00
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| Plumbing III - B |
Tortorici Sr |
T |
E |
4:30 PM |
9:00 PM |
1/16/2024 |
5/21/2024 |
|
| Plumbing III - B |
Tortorici Sr |
R |
E |
4:30 PM |
9:00 PM |
1/18/2024 |
5/23/2024 |
|
Type of Class: Semester
18 Sessions/80 Hours
Prerequisite: Plumbing III-B
The course topics are: Business Principles for Plumbers, Fundamentals of Crew Leadership, Water Pressure Booster & Recirculation System, and Indirect & Special Waste.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Type of Class: Semester
18 Sessions/80 Hours
Prerequisite: Plumbing IV-A
The course topics are: Hydronic & Solar Heating Systems; Codes; Private Water Supply Well Systems; Private Waste Disposal Systems; Swimming Pools & Hot Tubs; Plumbing for Mobile Home & Travel Trailer; and Introduction to Medical Gas & Vacuum Systems. Plumbing Journeyman Prep that will provide a review of subjects that are needed to pass the written exam for the plumber’s journeyman license exam. For the practical portion of the exam the class will also include practice on our custom designed house, this house is comparable to the 2-story house used in the State of Texas Plumbing Exam in Austin.
Class Language: English
Class Fee: $1,650.00
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| Plumbing IV - B |
Taylor |
W |
E |
4:30 PM |
9:00 PM |
1/17/2024 |
5/22/2024 |
|
Type of Class: Short Term
1 Sessions/8 Hours
Prerequisite: None Required (however, it is recommended that the student has completed most or all of their required 8000 apprenticeship hours, so that they can schedule their Plumbing Journeyman Exam with the State Plumbing Board in Austin shortly after completing this course).
This seminar provides a review of subjects that are needed to pass the written exam for a plumber’s Journeyman license. It also includes hands-on experience for the preparation of the practical section of the exam. This seminar will include a demonstration on our custom designed house, comparable to the 2-story house used in the State of Texas Plumbing Exam in Austin.
Lunch is included.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Type of Class: Seminar
1 Sessions/4 Hours
This course is designed for field personnel. This is a four (4) hour hands-on seminar. The most updated information and instruction will be provided on the following topics: cutting, gluing, fittings identifications/direct-flow, and schedules/solid/foam core.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Soldering & Brazing with Copper
Type of Class: Seminar
1 Sessions/4 Hours
Prerequisite: None Required.
This course is designed for field personnel. This is a four (4) hour hands-on seminar. The most updated information and instruction will be provided on the following topics: Copper Material Identification; Preparing and Installing Brazed Copper; Preparing & Installing Copper Material; Hands-On Brazing Project; and Safety.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Type of Class: Seminar
1 Sessions/4 Hours
This module is a fundamental Pipe cutting and Threading course designed to teach the relevant and prerequisite skills needed to measure, cut and Thread pipe. The student will be provided with an understanding of the essential skills and equipment necessary to perform the job of cutting and threading pipe. The student will be responsible for understanding the correct terminology associated with this process, including both proper and slang names for the equipment used along with the proper techniques for using a variety of tools and devices. The student will develop critical thinking so as to recognize and react to various issues and situations that may arise and respond in an safe and responsible manner to these situations. In addition, the student will learn visual and tactile inspection techniques to assure that the threads being used are in satisfactory condition and suitable for the intended process.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Water Treatment Specialist
Type of Class: Short Term
2 Sessions/16 Hours
Prerequisite: Student must have a current Water Treatment Specialist License.
This 16 hour course counts toward 8 Texas Commission of Environmental Quality (TCEQ) continuing education hours for those who have already received their WTS license. The course consists of class and lab work, and includes all new and updated information from the industry and governmental bodies. The class is split with 4 hours in the lab and 12 hours in the classroom.
Lunch will be provided.
Note: Students must bring a copy of the 10th Edition USC Manual for Cross-Connection Control, as required by TCEQ. Books are available for purchase upon request. Contact the CEF office for book cost and to request a copy PRIOR to the first day of class.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |
Working with ProPress & ProPress Stainless
Type of Class: Seminar
1 Sessions/4 Hours
Viega ProPress is the trusted copper press joining solution. It provides installers added confidence in their ability to ensure secure connections. With system-matched tools, rings, and jaws, press connections are made in seconds, making ProPress suitable for virtually any type of project. This course will cover the following topics: Fitting anatomy; Approved Applications; Pipe Preparation; and Proper Installation. MegaPressG with an HNBR sealing element is the first press fitting system for carbon steel pipe approved for use in gas and fuel oil applications. MegaPressG is ideal for industrial, commercial, and residential applications and performs well in both new installations and retrofit projects. Tested to the strictest standards in North America. MegaPressG joins carbon steel pipe reliably trough the engineered design of the fittings and battery-powered press tool. This course will cover the following topics: Fitting anatomy, Approved Applications, Pipe Preparation, and Proper Installation. After going through this hands-on training, all attendees will receive an electronic certificate and laminated pocket card confirming that they were trained by an authorized Viega representative.
| Course |
Instructor |
Day |
Lang |
Start Time |
End Time |
Start Date |
End Date |
Loc |
| |
** CLASSES FOR THIS COURSE ARE SCHEDULED IN AN UPCOMING SEMESTER ** |